Soaping Time!!!

Everywhere I look I see these gorgeous soaps: Instagram, Pinterest, Facebook. Some of them look like sculptures, I would just put them in my living room and look at it all day long.

But unfortunately I haven't seen many soaps made with the products I sell, which is understandable, as they are a lot more expensive than the regular ingredients most soap makers use: coconut oil, palm oil, cocoa butter, shea butter. And besides the fatty acids, I am not very sure the butters and oils properties survive the saponification process (if you know, please, send me a message.)

After spending many nights lurking on soap making sites and playing on Soapcalc's lye calculator (they have most of my products on their list of fats and promised to add the ones they still don't have). I bit the bullet and bought the basic tools needed for it - scale, stick blender and a thermometer, it all cost about $35 on eBay.

I bought a very expensive lye on Etsy - there are many cheaper ones everywhere, but for my first batch I decided to splurge. Besides I like the bottle, I don't trust me to buy lye, a poison, in a plastic bag.

I improvised for the rest, a milk carton for the mold, jars and spatulas I had in the house.

My first soap was a half batch with Ucuuba and Tucuma Butters, Pracaxi and Brazil Nut Oils.

 

It made a very dark soap, since my mold was too big for such a small batch, 2 days laters I decided to cut this one in small pieces and use it inside a new soap!

For my new soap I used: Cupuacu, Murumuru and Tucuma Butters, Buriti, Andiroba and Brazil Nut Oils.

Followed the instructions to a T (I think), even waited patiently for my fats and lye solution to get down to about 110°F.

The soap got a lot more orange than I thought it would be... I was aiming for a whiter soap, but in order to reach the right balance for my soap I had to use quite a lot of Buriti Oil. The saponification process started super fast which made me freak out. And the soap felt a bit oily to the touch at first, which also made me freak out, actually all I wanted was for an experienced soap maker to hold my hand and say it would be ok.

I couldn't wait to cut it, there were no pockets of lye or grease, the texture felt ok. Even the fine white layer on top of it seems to be normal (I Googled, thankfully soap makers are awesome sharing people).

This is it 4 days later.

I think the hardest thing about soap making it is the wait. Four weeks until I find out if it works, if it won't leave a yellow Buriti layer on everything, if it won't fall apart, and all the other things that can go wrong with a soap (actually I think that the worst has passed.)

So it isn't pretty, but it is mine and very unique! If it turns out good I will throw a party!

Sites that helped me:

http://soapcalc.net/

http://smallnotebook.org/tutorials/beginner-soapmaking/

http://www.soapqueen.com/bath-and-body-tutorials/cold-process-soap/free-beginners-guide-to-soapmaking-cold-process/

DIY - 100% Cacao & Cupuacu Body Butter

I saw a recipe on a French site a few weeks ago that asked for "black cocoa butter", that got me curious, I called my people in Brazil and they said there was no such a thing.  After little research, I found it on Ebay (what can't you find there?), but when it finally rechead me, I realized it isn't cocoa butter, it was what we call in Brazil "cacao mass", raw cacao, what is left behind after removing the butter.

I wasn't sure how that would work on a skin product, but I am happy to say, the results were very nice. It spreads nicely, the skin looks and smells wonderful, I do not recommend it for hair, as it is a bit too thick. Here is my Brazilian version of the French recipe.

Cupuacu Butter - 2 oz.
Pracaxi Oil - 0.25 oz.
Brazil Nut Oil - 0.25 oz.
Black Cocoa Butter - 0.5 oz. (I found it on just one shop on Ebay)

Melt the Cupuacu Butter in a double boiler over low heat heat. Mix the oils in. Separate it into two equal parts and transfer them into two different containers. In one of the two containers, add the cocoa butter cut in very small pieces and heat if necessary to melt. Let cool a bit and then put the two preparations in the freezer for a few minutes.
Take them out and mix them well again, you can use an electrical mixer. Put back in the freezer.Transfer both butters into a container keeping them separate.

I did mix mine to a whipped butter consistency. For that you definitely need a electrical mixer.

The dark butter will be slightly harder because of the cacao. Use that side for body and the other for neck and face. 

Andiroba Oil - The Miracle Oil

Acai Berry Oil - Anti-aging, Antioxidant Powerhouse.

Q&A - What is a "cold pressed oil?"

Answer:

Cold pressed oils, also known as cold expeller pressed oils, are oils obtained by mechanically pressing the oily parts of the plants in a temperature controlled environment. 
The friction, necessary for this process, causes temperatures to rise, the harder the plant being pressed, the higher the temperatures can get, temperatures can not rise above 120°F (49°C) for any oil to be considered cold pressed.

This process is not as efficient as using heat and hexane, but the oil remaining from cold pressed seeds, nuts or vegetables has no trace farm chemicals, no hexane molecules, no poisonous trans fatty acids.

You can find many of the amazing cold pressed Brazilian Oils at my site Rainforest Chica.

Love from the U.K.!

Rainforest Butters Sample!

No Wax All Natural, Vegan Lip Balm

  Natural lip products are usually made of waxes, butters and oils. 

  Beeswax is the most commonly used, but Candelilla and Carnauba are becoming more and more popular with the increasing demand for vegan products.

  Waxes are mostly used to raise the melting point of lip products, they do offer some health/beauty benefits but they are not as beneficial as butters and oils. 

  I am not a huge fan of stick lip balms (they end up melted on the bottom of my purse or my Jeep's cup holder), so my lip products don't need to be super hard.

   Ucuuba butter is softer than all the waxes but still hard enough to make a perfect jar or tin lip product.

   Depending on the other products used, I use 1/2 to 2/3 of Ucuuba for my recipes.

   A balm made from Ucuuba can also be used on upper lip to help with those pesky little wrinkles, cuticles, dry patches, etc... 

Ucuuba Butter Benefits

Ucuuba Butter is said to have anti-inflammatory and antiseptic properties and is ideal for treating acne, eczema and dry or irritated skin. Exceptionally rich in essential fatty acids, Ucuuba Butter is considered to have anti-aging properties and can be used to replenish tone and moisture to dry and mature skin. 

Anti-aging Lip Balm

Ucuuba Butter - about 1 oz

Muru Muru and Cupuacu Butters - 0.5 oz (0.25 oz. of each)

Pracaxi and Acai Oils- 10 drops of each

  

Put all the ingredients in a VERY clean and dry glass jar, make sure the lid is also clean and doesn't smell like food. Put jar in a pot with water, make sure it is not too much water, jar is not supposed to float. Use low to medium heat, water does not need to be boiling.  As soon as all the ingredients are melted, pick up the jar using a towel, *JAR WILL BE HOT, BE VERY CAREFUL* DRY the jar very well, if water gets in your balm it will shorten the shelf life of it. Pour in the container of your choice (I like the cute metal tins), put in the fridge for a few minutes and you will have the best lip and fix-everything balm ever!

  Ucuuba butter is dark brown and offers a nice gloss but natural coloring and scents can be added, they will limit the uses of your balm. I do add a couple drops of coconut unsweetened flavor oil, which still allows me to use it anywhere else I want.

  Unless they give you different directions, add coloring and scents AFTER the butters and oils are melted.

  This recipe can be modified easily with the uses of other oils (for a cheaper version coconut or olive oil can be used), if using different butter, melting points have to observed.

I sell these Butters and Oils at my shop Rainforest Chica.

I sell individual tin cans on my site, for more quantities take a look at Paper Mart and SKS sites.